便携式水刀切割机安全防爆储罐破拆包邮厂家

使用微信扫描二维码分享朋友圈，成交更快更简单！

便携式水刀切割机安全防爆储罐破拆包邮厂家

不仅是与线切割相比有优势，就算是与电弧及火焰切割技术相比，同样也有差异，优势体现的更加明显。正是因为如此，水切割已经成为目前受欢迎的切割技术之一
切割优势
Cutting advantage
1．通用性强，几乎所有材料都能切割。
1. versatility, almost all materials can be cut.
2．水刀是冷态切割，切割时不产生热效应、不变形、无挂渣、无烧蚀，不会改变材料的物理化学性质。
2. water jet cutter is cold cut. When cutting, it does not produce thermal effect, no deformation, no slag and no ablation. It will not change the physical and chemical properties of the material.
3．割缝小，加上冷却切割的特性，可以提高材料利用率。
3. the small cutting seam and the characteristics of cooling and cutting can improve the utilization ratio of materials.
4．切割介质只有水和天然磨料，切割过程中不产生其它物质，是清洁环保的切割工艺。
4. the cutting medium has only water and natural abrasives. No other substances are produced during the cutting process. It is a clean and environmentally friendly cutting process.
5.切割后，切割面整齐平滑，不会在切割过程中使被切割物体有任何损伤，可以起到许多切割工具无法实现的切割作业。
After 5. cutting, the cutting surface is neat and smooth, and it will not cause any damage to the cutting object during the cutting process, and it can play a number of cutting operations that can not be realized by the cutting tools.
2故障分析
2 fault analysis
A、高压、低压皆无但换向正常 排除方法 ：
A, high pressure and low pressure are not available, but commutation normal elimination methods:
1.检查自来水供水是否断水或水压过低；
1. check whether tap water is water cut or water pressure is too low.
2.检查水泵是否正常；
2. check whether the pump is normal.
3.检查宝石喷嘴是否正常（水束明显发散）；
3. check whether the gemstone nozzle is normal (the water beam is divergent).
4.检查挡钣后窥孔有无漏油、漏水（有漏水，表明高压腔动密封损坏；有漏油，表明油缸档板上动密封损坏。）；
4. check whether there is leakage or leakage in the peephole after the check plate (there is water leakage, indicatin